3DChicken
Roof Dog - TentBox Security Alarm Mount
Roof Dog - TentBox Security Alarm Mount
Compatible with the following TentBox models (More to follow)
- TentBox Go
- TentBox Lite 2.0
- TentBox Lite XL
- TentBox Classic 2.0
- TentBox Cargo 2.0
Further model compatibility to follow. Please message me via livechat regarding other models.
🚨 TENTBOX SECURITY ALARM NOT INCLUDED 🚨
Compatible with the following alarm models
The original TentBox security alarm mounting solution. Brought to you from Spennymoor, Durham!
Direct mounting to your TentBox, unobstructed alarm speaker & constructed with tough carbon fibre infused materials. Roof Dog has been rigorously developed to protect your TentBox in all conditions.
Real Dog | Roof Dog | |
Hang onto your roof bars at 70mph |
❌ | ✅ |
Securely attatch to your TentBox |
❌ | ✅ |
24/7 protection |
❌ | ✅ |
Alert the entire neighborhood of attempted theft |
❓ | ✅ |
Need feeding |
✅ | ❌ |
Be blamed for farts |
✅ | ❌ |
Wake you up at 3am barking at nothing |
✅ | ❌ |
Tent Box theft is at an all time high, having bought one myself then seeing their was 5 thefts in a single week in my area, I searched high and low for a proper mounting solution for the Tent Box alarm, in the end, I figured I need to bring something proper to market.
Whats in the box? (Absolutely everything you need!)
- Roof Dog Mount
- Two Security Torx Screws
- Two Mounting Nuts (They fit perfectly in the rail)
- Two Screw Grommets (Plus one spare! Three in total)
- One Security Torx Allan Key
TentBox Security Alarm NOT Included
Installation Instructions
A video will be made very soon, but written instructions are as follows.
- Insert your TentBox Security Alarm into the mount
- Remove the end cap from your TentBox aluminium rail
- Slide in both square nuts. These must be sideways so they dont fall out.
- Push the square nuts together.
- Place the Roof Dog mount on the rail.
- Slide the Roof Dog mount to the left or right until you make contact with the square nut.
- Insert the security screw, but dont fully tigthen.
- Repeat in the opposite direction.
- Slide to desired position and carefully tighten both screws. These do not need to be overly tight.
- Insert the rubber screw covers.
- Roof Dog is now installed!
Please consider leaving a review and sharing my product! Lots of hours went into development to provide much needed security for the TentBox & Roof Tent communities. It means a lot!
Share
Collapsible content
3D Printing Process
Our products are made on demand using a manufacturing process called FDM 3D Printing (Fused deposition modeling).
This allows us to print your orders on demand, with minimal lead time in processing.
3D Printing Materials
What are the 3DChicken range of 3D printed goods made from?
Polylactic acid, also known as PLA, is a thermoplastic monomer derived from renewable, organic sources such as corn starch or sugar cane. Using biomass resources makes PLA production different from most plastics, which are produced using fossil fuels through the distillation and polymerization of petroleum.ic sources such as corn starch
Although this material is strong, prolongued exposure to heat/sun may cause some deformation.
Processing Time
Every single product is made on demand, in the UK. This is why we estimate it takes 1-7 days to process your order. (Most orders are processed within 1-2 days)
Quality Control
We only sell and ship products that meet our high standards. If we aren't 100% happy with the quality, why would we expect you to be!
Because of this, you can find some discounted items in the store that weren't quite good enough to be sent to customers!
That being said, due to the nature of 3D printing, all products are subject to unique textures, visible layer lines & minor defects.
Returns
3D Printed items are made on demand, specific to customer requirements. We do not accept returns.
Great product blends in well with the tentbox great fixings great price aswell can recommend this product