Based on 35 reviews
83%
(29)
11%
(4)
6%
(2)
0%
(0)
0%
(0)
Practical and useful

A solid and well constructed case for your meshtastic device!

Nicely done

Thoughts?

A) Commercials:

- A little pricy but a nice product.
- Good online store and easy payment.
- Good initial confirmation but then went quiet for 10 days and I had to chase. Updates on progress would have been nice but the products arrived quickly and very well packaged after my second email.

2) Product Design:

- Good quality printing and materials.
- Fitted together nicely and all the parts for the case (screws, buttons and button cover) were included.
- There are no instructions. It took several attempts to work out what when where. A few tips:
A) The GPS antenna is stuck on - peel it off and you stuff it into a cut out in the ‘middle frame’.
B) undo the screw on the Supreme board (antenna end) to ‘release’ the antenna (turn off the device so as not to knacker the radio) and insert into the middle frame antenna hole (putting the washers and bolts on properly).
C) tighten the two front screws and remover totally the two USB C / SD card clot end board screws.
D) put the buttons in to the holes (try not to let the drop out or you will lose them (as I did). Please supply some spares…
E) insert the board into the middle chassis frame and screw in with the long thins supplied screws.
F) put top the bottom (battery) covers and do up the 6 bolts.

Suggestions:
- Supply or fix the buttons - they drop out easily.
- Make it possible to insert a SD card (if using the case for non-Mestastic applications).
- Add a clear perspective screen to protect and seal the box.
- I used different 5dB gain antennas which work well.
- Give me a discount on the next order :)

High quality

Lilygo T-Echo Extended Battery Spacer - fits every T-Echo I use. Everything is precisely made and fitted. I recommend and I am satisfied.

Besser als gedacht

Kann ich empfehlen, Grüße aus 🇩🇪👍

Alarm mounting box

Great product blends in well with the tentbox great fixings great price aswell can recommend this product

Looks great

Quick delivery and a great print, thanks!

Fits well

Good fit. Well made, and keeps the board protected

Kitastic

Well made kit complete with all the screws needed. Printed assembly instructions would have been useful, but got it assembled correctly in the end.

Plug & Play JST-SH 1.25mm Female to JST-PHR 2mm Male Battery Adapter Cable

Works fine :-)

Case standard & micro - meshtastic starter kit

Nicely made. Very sturdy and feels nice carry around. Couldn't find a case like this anywhere for my board until stumbling a YT video which lead me to this website. Hopefully in the future I'll buy more items for DIY projects to come.

Wrong polarity

I had to swap the pins over to connect to the recommended "EEMB Lithium Polymer battery 3.7V 2000mAh 103454 Lipo Rechargeable Battery Pack with wire JST Connector" to match the polarity of the Heltec v3 power connector.

3D Chicken Meshtastic case for Heltec v3 card

I would just like to say that I am very happy with the case,
This is just to outline my failings and perhaps help with the design of future products..
Firstly, I need to point out that I have sausages for fingers. My skill at soldering is akin to an Imperial Stormtroopers marksmanship., so I found the soldering of the switch and the tiny mounting screws impossible, so I didn't use them - I decided on an always on unit until the battery gives up, then recharge.
Secondly the mound for the card itself was a little bit too wide, so I had to sand it down a bit and I had to use my Dremmel to file other bits down to fit. and to clean up the screw holes, no drama but it takes time.

Finally I asked to put my phone number on the front of the parcel & the reason why - and this wasn't done. Here in Romania, they only deliver letters, they don't deliver parcels (even small ones), and my Post Office is a real pain to get to, so with a phone number, they usually call you to collect. I waited a looong time and nothing happened , finally when I was in that area I popped in and there it was.

Good design

Well thought out and priduced for the purpose.

Antenna 868 MHz (ISM band)

Antenna checked on antenna analyzer. Good parameters and good workmanship of the antenna. A bit too expensive for me. I recommend :-)

Heltec V3 Case Meshtastic

Everything is in perfect order. Very aesthetic workmanship. The casing is very well matched to the module Heltec V3. Easy assembly. I recommend :-)Wszystko w najlepszym porządku. Działa prawidłowo. Polecam :-)

JST-SH 1.25mm Female to JST-PHR 2mm Male

Everything is in perfect order. It works properly. I recommend :-)

Well printed and fits perfect

Lovely case, but it was a bit of a puzzle to figure out how to fit everything inside, which screws to remove from the lilygo extreme, but I got there in the end.

Great choice for 3d printing

Was fast and was perfect

Perfect

Nice solid little case, with a selection of mounts that make it very adaptable in how its used quickly & easily

Good

Case is overall good quality and fits nicely, but the buttons can fall off if you are not careful.

Yes... But no...

Overall very beautiful and well made case but I am forced to carry it for the moment in a bag because the buttons are too thin and do not hold. I am the host of a YouTube channel and I will soon be producing a tutorial dedicated to the Meshstatic network. We will be able to see your box but I don't know if I will talk about it for the reason mentioned above. In addition, important shipping costs: 16 euros. I have paid a customs tax of 16 euros. A nasty surprise! Thank you Brexit! In this case, I cannot recommend your product. Sincerely, Gaël - YouTube channel "Rando QRP".

Precisely as advertised…

Decent fit and good finish. A nice design which snugly fits the T-Deck and makes a very nice, tidy setup. It’s fairly snug inside with the recommended battery so the speaker needs relocating to the side opening. GPS board fits snugly but you may have fun getting the antenna into place!
Recommended.

Great little case

What a brilliantly engineered case for your Heltec V3 meshtastic board. Room insde for a GPS unit as well as battery.

Great Cases

Ordered 4 cases, for the T-Beam Supreme.
Great customer service, I asked for the details such as button sizes and windows and button covers. All came nicely packaged and protected with all the hardware.
Items fitted very well. (opted to use the slightly looser button in the end). this is a personal preference thing.
Very Happy and would recommend. I will be buying from this store again.